LD Systems
®
is a registered brand of the Adam Hall Group
Adam Hall GmbH | Adam-Hall-Str. 1 | 61267 Neu-Anspach | Germany
Phone: +49 6081 9419-0 |
adamhall
.com
SAFETY INFORMATION
1. Please read these instructions carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Use the equipment only in the intended manner and for the intended purpose.
6. During installation, observe the applicable safety regulations for your country.
7. Never place sources of ignition, e.g., burning candles, on the equipment.
8. Do not use this equipment in the immediate vicinity of water (does not apply to special outdoor equipment
- in this case, observe the special instructions noted below. Do not expose this equipment to flammable
materials, fluids or gases.
9. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled with
liquids, such as vases or drinking vessels, on the equipment.
10. Make certain that objects cannot fall into the device.
11. Use this equipment only with the accessories recommended and intended by the manufacturer.
12. Do not open or modify this equipment.
13. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping
hazards.
14. During transport, make certain that the equipment cannot fall down and possibly cause property damage and
personal injuries.
15. If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment or if
it has been damaged in another way, switch it off immediately and unplug it from the mains outlet (if it is a
powered device). This equipment may only be repaired by authorized, qualified personnel.
16. Clean the equipment using a dry cloth.
17. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate plastic
and paper/cardboard.
18. Plastic bags must be kept out of reach of children.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARATIONS_LD_SYSTEMS.pdf
To request warranty service for a product, please contact Adam Hall GmbH, Adam-Hall-Str. 1,
61267 Neu Anspach / Email [email protected] / 49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste separation)
This symbol on the product, or the documents accompanying the product, indicates that this appliance may not be
treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled waste
disposal. Please dispose of this product separately from other waste and have it recycled to promote sustainable
economic activity.
Household users should contact either the retailer where they purchased this product, or their local government office,
for details on where and how they can recycle this item in an environmentally friendly manner.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product
should not be mixed with other commercial wastes for disposal
CE CONFORMITY
Adam Hall GmbH hereby confirm that this product meets the following guidelines (where applicable):
R&TTE (1999/5/EC) or RED (2014/53/EU) from June 2017 / Low-voltage directive (2014/35/EU)
EMC Directive (2014/30/EU) / RoHS (2011/65/EU) / The full declaration of conformity can be found at
www.adamhall.com. You can also request it via [email protected]
ICOA 12 UB (W)
UNIVERSAL MOUNTING BRACKET FOR ICOA 12“
FEATURES
• Universal bracket for horizontal or vertical wall attachment
• Truss mounting with optionally available clamp
• Easy-Click System
• Rotatable in 10° increments up to 180° with scaling indicator
• Five holes for M10 screws
• Six holes for wall installation
• Cable feedthrough
• Load capacity up to 24 kg
DESCRIPTION
The freedom to achieve the sound you want is the concept behind the ICOA and its matching
U-mounting bracket as well.
It gives you complete flexibility to mount the ICOA in different ways - to the wall, either horizontally or
vertically, or to a truss using an optional clamping tool.
You can install the bracket on the wall with six screws and quickly and effortlessly „click“ your ICOA into
place with the Easy-Click system. All that‘s left to do is to fasten everything down with a safety screw.
The U-bracket‘s cable feedthrough behind the ICOA keeps things looking neat and tidy. Once the ICOA is
installed, you can freely swivel it around in 10° increments up to 180°.
Enough flexibility to find your ideal angle.
SPECIFICATIONS
Product number:
LDICOA12UB(W)
Product type
PA Loudspeakers Accessories
Type
Wall bracket
Color
Black (LDICOA12UB)
White (LDICOA12UBW)
Material
Steel
Surface
Powder-coated
Max. load
24 kg
Weight
3.7 kg
