4
This symbol indicates hazards that can cause an electric shock.
This symbol indicates danger spots or dangerous situations.
This symbol indicates danger from hot surfaces.
This symbol indicates danger from high volumes.
This symbol indicates supplementary information on the operation of the product.
This symbol denotes a device that does not contain any user-serviceable parts.
SAFETY INSTRUCTIONS
DANGER:
1. Do not open or modify the device.
2. If your device is no longer working properly, liquids or objects have gotten inside the
device, or the device has been damaged in any other way, switch it off immediately and
disconnect it from the power supply. This device may only be repaired by authorized
specialist personnel.
3. For devices of protection class 1, the protective conductor must be connected correctly.
Never interrupt the protective conductor. Protection class 2 devices do not have a protec-
tive conductor.
4. Ensure that live cables are not kinked or otherwise mechanically damaged.
5. Never bypass the device fuse.
WARNING:
1. The device must not be put into operation if it shows obvious signs of damage.
2. The device may only be installed in a voltage-free state.
3. If the power cord of the device is damaged, the device must not be put into operation.
4. Permanently connected power cords may only be replaced by a qualified person.
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCH
ENGLISH