6
574-537-8900
Rev: 10.29.20
PowerStance
™
3500
Tongue Jack
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0002675
Manual Operation
NOTE:
In the event of loss of power, the PowerStance
Tongue Jack can be operated manually.
1. Manually unhitching from tow vehicle:
A.
Chock the tires of the trailer.
B.
Be sure the footpad of the PowerStance Tongue Jack
jack is pinned securely in place with the clevis pin and
hairpin cotter pin
(Fig.9B)
.
C.
Make sure the ground surface under the power tongue
jack is firm and level.
A
B
Fig.8
Fig.9
A
Fig.10
PowerSwap Auxiliary Cord
(Part Number 813749 is Optional and Sold Separately)
The PowerSwap Auxiliary Cord
(Fig.8)
allows the user to
power the PowerStance Tongue Jack from the battery of the
tow vehicle when there is no battery power from the trailer.
A
B
Fig.11
1.
Insert the 7-way plug
(Fig.8A)
into the 7-way connector on
the tow vehicle.
2.
Insert the 2-pin connector
(Fig.8B)
into the plug
receptacle of the PowerStance Tongue Jack
(Fig.6C)
.
ALL ELECTRICAL WIRING HARNESSES SHALL BE
LOOMED AND SECURED TO PREVENT POSSIBLE
DAMAGE AND INSTALLED IN ACCORDANCE WITH
RVIA ELECTRICAL STANDARDS.
D.
Remove the rubber plug
(Fig.10A)
on top of the
PowerStance Tongue Jack’s gearbox to expose the
manual drive shaft.
E.
Insert the socket end of the manual crank handle
(Fig.11A)
into the manual drive shaft.
NOTE:
The PowerSwap Auxiliary Cord is optional and
sold separately.
A
