lbx ULTR Small, Руководство пользователя

Страница: 6 / 18

6
4. Maintenance
• Regular maintenance, electrical control system with high pressure air blow off the dust.
• Clean the tank at least once a week
Trouble clearing
No. Problems Possible Cause Solutions
1 No ultrasonic
activity
A. Power supply not connected
B. Fuse broken
C. Cable is short circuited
D. Transducer is short circuited
E. PCB Board broken
F. Other reasons
A. Check and plug power switch
B. Check the fitted power supply and change
the same specification fuse
C. Connect fitted cable or replace a new
D. Consult with your supplier
E. Check the broken part and change it
F. Consult with your supplier
2 Not well
cleaning
A. Not strong ultrasonic
cleaning
B. Too high or too low liquid
surface
C. Too high too low
temperature
D. Not suitable cleaning liquid
E. Other Reasons
A. Connect ultrasonic button and adjust
B. Adjust liquid into the best surface
C. Adjust the temperature into the most fitted
D. Stop and switch off power supply, replace
suitable liquid after previous liquid
cooling down
E. Consult with your supplier
3 Electric Leakage A. Customer side not grounded
B. Machine not grounded
A. Ensure it is grounded
B. Check if machine earth wire loosens
4 Other problems Consult with your supplier