LAZBOY Limited 1304, Руководство пользователя

Страница: 35 / 48

33
PROBLEM CAUSE SOLUTION
Moved my
spa and
now it Wiring error
at GFCI Check Neutral wiring of GFCI (see
diagrams on pages 9-13)
doesn’t
work No power to
spa Reset circuit breakers on GFCI panel
and main circuit breaker panel
Nothing
works Breaker has
tripped Check and reset breaker. If problem
persists, check for loose electrical
connections. Check for Neutral
wiring error at GFCI.
Pump not
running No power to
spa Reset circuit breakers on GFCI panel
and main circuit breaker panel
Pump runs
continuous Normal Spa is equipped with constant
filtration system (see page 29)
Speaker
does not
pop up Speaker
mechanism
broken Replace speaker.
Water does Air lock Bleed air from the system (page 31)
not flow Closed Jets Open all jets by turning
counterclockwise
ACV open Close air control valves
See also
Circulation Pump
on page 32
Water too
hot High set
temperature Turn down set temperature on
topside control panel
High
ambient
temperature Remove the cover from the spa
Water will
not heat Thermostat is
set too low Check and reset to desired
temperature
Air open Close air control valve
Dirty filter Check and clean filter
Blown fuse Check and replace fuse
Slide valve
closed Check and open all valves
Cover off Put cover back on spa
Spa in
Standby
mode Press the Standby button and take
spa out of Standby (see
Standby
Mode on page 20)