LAWO V_pro8, Руководство по установке и эксплуатации

Страница: 24 / 109

V1.0/2 24 V_pro8 Manual
Installation & Configuration
Network Connection
Network Connection
To control parameters, you will need to connect an external computer to the pro8 , via its Local Area
Network port ( LAN 1 or 2 ), and open a web browser session.
The computer may connect either directly to the unit, or via a network switch or hub:
Direct Connection:
Networked Connection:
Each unit provides two LAN ports on the rear panel. In Version 1.0, these may be used for a main and
redundant network connection. In a future software release, the second LAN port may be used to
connect RAVENNA (audio over IP), or other control devices such as the Lawo mc
2
/Nova 73 or VSM.
Use one, or both, of the LAN ports to connect the pro8 to your computer or control network:
Cable Type: straight (1:1) or crossed Ethernet cable.
Connector Type: RJ45.
Network Speed: 100 and 1000 Base-TX LAN speeds
are supported (>= 100 Mbit/s is recommended for video
thumbnail streaming).