ruby User Manual
Version: 6.6.0/1
45/78
6. Operation
6.10
DSP Parameters
The remaining source parameters can be adjusted by selecting a source. The DSP available is defined by the
DSP Core and its configuration. Therefore, for more details on specific parameters, please refer to the manual
for your DSP Core. This topic describes the operating principles.
6.10.1 Adjusting Source Parameters
1
.
Select the source you wish to work on by pressing its fader strip
ACCESS
key - the key turns white.
The upper controls on the Central Module switch into "parameter control" mode, and on VisTool the "Source
Parameters" page appears:
VisTool (Source Parameters page)
Control Surface (INPUT parameters)
VisTool shows all available parameters, and so this is the best way to get an overview of a source.
The surface controls are paged through different parameter sets using the
INP
,
DYN
,
LIM
,
DLY
and
EQ
keys on the Central Module.
