ruby User Manual
Version: 6.6.0/1
33/78
6. Operation
6.3
Source-Specific Functions
The four small MF Keys on each fader strip are labeled by the electronic display. Their default functions vary
depending on the type of source. The standard configuration supports the following functions:
·
CONF
- the DJ, LINE, TEL 1 and TEL 2 sources can be assigned onto the conference bus to create a
mix minus for the source. You must enable
CONF
on more than one source to activate the conference.
The conference system is described in more detail
.
·
TALK
- press this key to talk to the TEL 1 or TEL 2 sources (via their n-1 return) or to the GUEST
headphones.
·
AGn
- enable this key to turn on
for the DJ and GUEST mics.
·
On the TONE source, the 4 small keys select the frequency of the tone: 63Hz, 400Hz, 1kHz or 12.5kHz.
