LAWO mc256 MKII, Техническое руководство

Страница: 169 / 372

mc²56 MKII Technical Manual V5.10.2/1 169
Chapter 3: AdminHD
Signal List Configuration
Each page has three columns:
Directories & signals
This column displays the configured Signal List.
Signals are organised into directories and subdirectories which can be added and renamed as you wish. Use the
+ and – signs to open and close branches of the Directories & signals column to interrogate the configured
signal list.
Hardware Tree
This column lists all the signals within the Core configuration. The list uses the alias names (if entered).
Otherwise, default system names are used to describe each component – for example, MO4PO1DAL60 :
·
MO4 – indicates the Nova73 Module (e.g. Module 4).
·
PO1 – indicates the port on the Module (e.g. Port 1).
·
DAL60 - indicates the device on the port (e.g. a DALLIS Device with 60 audio channels).
Use the + and – signs to open and close branches of the Hardware Tree . Click on an individual signal, or a
card, and the signal(s) appears in the third column - Selected signals .
Selected signals
This column is used to build a list of signals, which you can add to the selected subdirectory using the
button. Signals in red are already used somewhere within the configuration; those in black are not.
For more details, see Editing a Signal List .