LAWO mc256 MKII, Техническое руководство

Страница: 101 / 372

mc²56 MKII Technical Manual V5.10.2/1 101
Chapter 3: AdminHD
Configuration Files
Control System Cold Start Files
The following configuration files are stored on the mc²56 MKII control system, and are read after a cold start :
·
config.tcl – this file, known as the Core configuration, defines the:
o
Nova and DALLIS components.
o
System-wide parameters such as sample rate, reference levels and sync options.
o
Signal parameters such as the HLSD address, name, default label, I/O settings, silence detects and
mapping tables.
·
gui_config.tcl – this file, known as the Signal List configuration, defines the Directories, Subdirectories
and signal organisation within the GUI’s Signal List display.
·
custom.tcl – this file defines customer-specific functions.
·
userconfig.tcl – this file defines the user monitoring functions in the mc
2
console series.
·
Custom_template_instances – this folder stores the custom functions programmed from the GUI’s
Custom Functions display. Each function is stored as a separate .tcl file.
The table below summarises which files can be edited by AdminHD and which must be factory-configured. Also,
whether files can be accessed by mxGUI and how they are named within mxGUI's File Transfer display:
Control System Filename
Edit in
AdminHD
File Transfer to
mxGUI Appears in mxGUI as:
config.tcl
ü ü
Core Configuration
gui_config.tcl
ü ü
Signal List Configuration
custom.tcl
û û
n/a
userconfig.tcl
û û
n/a
Custom_template_instances
û ü
Custom_template_instances
Factory-configured files such as the custom.tcl and userconfig.tcl must be edited by Lawo personnel. If
you require further assistance to modify these aspects of the configuration, please contact your local Lawo
representative or email
support@lawo.com .