LAWO edge, Руководство пользователя

Страница: 123 / 154

edge - User Manual
Version: 1.0.13/1 Exported on: 22 February, 2024 123 / 154
•
•
•
•
8.5 .edge - Advanced -> Synchronization
The Synchronization parameters define the sync reference options for the processing blade. Please see .edge -
Synchronization for more information.
Operation (using HOME)
Most of the important fields are displayed on the main page. The PTP sub-pages become relevant if the Mode Select option
is set to PTP.
Synchronization (main page)
Available Parameters
The table below describes all available parameters.
Advanced (tree path) Parameter Possible Values Further Information
Synchronization Status Summary Read-only Shows Locked when the processing
blade is locked. i.e. the Mode Select
field (e.g. PTP) is receiving a valid sync
signal.
Mode Select External Ref#1
External Ref#2
PTP
FreeRun Defines the sync reference for the
processing blade (as described earlier).
PTP Read-only Shows Locked if the blade is receiving
a valid PTP signal from the network.
External Sync#1 Read-only Shows Locked if there is a valid sync
signal connected to the REF 1 IN (on the
rear I/O plate).
External Sync#2 Read-only Shows Locked if there is a valid sync
signal connected to the REF 2 IN (on
the rear I/O plate).