diamond - User Manual
Version: 8.0.0/1
Exported on: 24 October, 2023
97
/
228
control's function and current value. The surrounding MF keys provide monitor source selection and other options for each
output.
On a Combo module, there are fewer monitor source selection keys for the CR output (6 instead of 8), and there are no
dedicated
Dim
keys for the CR and HP outputs. In all other respects, the controls are identical.
For more details, see Monitoring.
Customer-defined Functions (4d)
The Central module includes another 16 MF keys that can be configured for other functions. Unless otherwise specified,
these keys are left undefined and come with blank labels.
On a Combo module, all of the MF keys are defined and so there are no spare keys for other functions.
Additional Central or Combo Modules
If the frame is fitted with additional Central or Combo Modules, then these must run in what is known as "monitor mode".
In this instance, all controls have a single mode of operation that is defined by the configuration. The MF key layout is the
same as that of the main module, except for the 16 additional MF Keys (shown in the images below).
Central Module (monitor mode)
Combo Module (monitor mode)
