A__madi4 User Guide
Version: 10.0.0/4
45/68
12. The RAVENNA Web UI
12.12.4
Copying & Pasting SDP / RTSP URLs
To copy and paste the SDP information from a sending device:
1.
Open a Web UI connection to the sending device, and click on the TX stream:
2.
At the bottom of the window, click on the
SDP
button to copy the stream's SDP information to the
clipboard.
If the stream is redundant, then information about both of the paths is contained in the same SDP.
3.
Now open a Web UI connection to the receiving device, and click on the RX stream to open its properties.
4.
Select
Show raw SDP
and then right-click anywhere inside the SDP area to paste the contents of the
clipboard (or press CTRL + V).
The
Stream Source
fields update according to the SDP information:
