A__madi4 User Guide
Version: 10.0.0/4
36/68
12. The RAVENNA Web UI
12.11
TX Streams
12.11.1
Creating a TX Stream
To publish audio from the device to the network, you will need to create a TX stream.
1.
Click on the
Create
button to open the TX stream properties:
2.
Use the fields to edit the properties.
3.
Once you have completed all of the settings, check the network packet size shown in the box that starts
"
Your configuration results in ...
".
The network packet size cannot exceed the the Maximum Transmission Unit (MTU) defined by the Ethernet
standard which is 1460 bytes. If the size exceeds the MTU, a warning appears and you
MUST
re-adjust the
4.
Click
Apply
to create the stream (or
Cancel
).
The stream is published to the network and appears at the bottom of the
TX stream
list on the
