A__mic8 / A__digital8 User Guide
Version: 10.0.0/4
49/66
11. The RAVENNA Web UI
11.15
Batch Create
The
Batch Create
function can be used to quickly create a series of similarly-configured TX or RX streams. For
example:
1.
Use the
button to open the 'TX Stream Properties' window and enter the parameters required for
the first stream.
2.
Under 'Batch Create' tick the
Enable
box.
3.
Enter a
Start
and
End
suffix to apply to the stream
Name
.
4.
Click
Apply
- a batch of TX streams are added to the Home page:
All properties are applied identically apart from the
Name
which takes the Start and End suffix, and the
Recording tracks
which increment automatically across the batch of streams.
The example above shows the set up for four identical RAVENNA Stereo Streams named "TEST1" to "TEST4",
where TEST1 uses Mic/Line In 1&2; TEST2 uses Mic/Line In 3&4; and so on.
The same principles can be applied to
, but this time it is the stream
Label
which takes the
Start
and
End
suffix, and the
Play tracks
which are incrementally assigned.
