LAWO A mic8, Руководство пользователя

Страница: 45 / 66

A__mic8 / A__digital8 User Guide Version: 10.0.0/4 45/66
11. The RAVENNA Web UI
11.13 Creating SMPTE 2022-7 Compatible Streams
To support SMPTE 2022-7 (streaming redundancy), a stream must be transmitted and received via two separate
network paths.
For an A__line device, the TX or RX interfaces are ETHERNET A (ra0) + ETHERNET B (ra1).
TX Stream Properties
First, open a RAVENNA Web UI connection to the sending device and make sure that the 'TX Stream Properties'
are configured to use both RAVENNA interfaces. This means assigning a multicast IP address to both of the
ra0
and ra1 fields:
ra1 - define multicast IP address Both ra0 and ra1 should be set to auto
All other properties should be configured as for a non-redundant stream, see TX Stream Properties .
Once you click Apply , the TX stream will be duplicated and published separately via both interfaces. Note that
information about both streams (main and redundant) is contained in the same SDP information.