LawnMaster CLGT2410H, Руководство оператора

Страница: 13 / 32

13
ATTACHING THE FLOWER GUARD
NOTE:
Attach the flower guard before attaching the auxiliary handle.
1. Put the flower guard over the top of the main handle. Then slide the flower guard all the way down
to the motor housing area. Make sure that the plastic toe pad is facing upwards as shown (Fig. 3).
2. Pull the steel flower guard rails apart and place it over the motor housing. Align and seat the guard
rails into the 2 recessed channels on either side of the motor housing (Fig. 4)
ATTACHING THE AUXILIARY HANDLE
1. Loosen the quick-release knob counter-clockwise and remove it from the auxiliary handle (Fig. 5).
2. Align the auxiliary handle with the handle support.
3. Insert the quick-release knob through the auxiliary handle and partially tighten the knob clockwise
by hand (Fig. 5).
4. Adjust the auxiliary handle to desired position (Fig. 6).
ASSEMBLY
Fig. 3
Fig. 4
Plastic Toe Pad
Steel Rails
Housing Channel