Lavor Skyvap, Инструкция по эксплуатации

Страница: 53 / 178

Field of application
The steam cleaner is suitable for cleaning:
Wide surfaces, such as:
• Tiled floor, parquet, stone and linoleum floor.
• Wax-treated tiled floor (wax removal)
• Tiles or tiled walls
• Roller shutters, guillotine windows
• Carpets
Small surfaces, such as:
• Interstices of heat radiators, tile joints, skirting
boards
• Door or window frames
• Shutters
Glass surfaces, such as:
• Windows, glass walls
• Glass doors
• Mirrors
Upholstery, such as:
• Carpets and moquettes
• Upholstered furniture (sofas, airmchairs).
• ATTENTION!
Furniture surfaces can be treated with the steam
cleaner under the following conditions:
• Never clean with the direct steam jet.
• Always use a soft absorbent cloth
• Work with little steam pressure
• When you clean, don’t exert any pressure with the
brush.
Assemblying of wheels and handle
• Assemble wheels by hand as shown in picture on
fig.
B
. No tool is required.
• The handle (13) must be fitted on the upper part
of the appliance with 4 screws (included in the
accessories supplied) (see picture on page II). You
will need a screwdriver for this operation (not
included in the accessories supplied).
Assemblying of the holding hook
• For a comfortable use of the two extensions,
assemble the holding hook (29).
• The holder must be fixed with screws (included in
the accessories) under the extensions (see picture
fig.
B
)
Parts of the steam cleaner:
1 Steam lever
2 Flexible hose
7 Window wiper
8 Steam indicator
9 Boiler cap
10 Plug and power cord
11 Wheels
12 Steam intensity regulator
13 Handle
14 Scrubbing brush with clamps
15 Cloth holding clamps
16 Brush-joint
17 Extension pipes
18 Spring button
19 Steam nozzle handle
20 Tilting sprayer
21 Brush
22 Triangular brush
23 Cloth
24 Cotton cover
25 Anti-scale bag
26 Funnel
27 Jug
28 Accessory bag
29 Holding hook
CONTROL PANEL
• 3 Steam pressure lamp (green)
• 4 Main switch
• 4/B ON-OFF switch light (orange)
• 5 Heater light (green)
• 6 Water indicator lamp (orange)
Starting the steam cleaner
Fill with water
(fig.
E
)
•
ATTENTION!
• Before filling the boiler with water, unplug the
machine.
• Fill in the steam cleaner only with distilled water
or with tap water with low mineral contents.
• The formation of limescale in the machine can
cause the machine to overheat and clog the
steam outlet pipe.
• The steam cleaner must rest on a plane surface.
EN
53