background image

Dear customer,

LED TV backlight

We are delighted that you have decided on this 

LED TV backlight

If you have questions about the device or spare parts/accessories, 

contact customer service of the distributor.

Proper use

• This product is suitable for use as a backlight for TV sets or

similar.

• The product is exclusively designed for use in dry indoor spac-

es. The device is not suitable for use in damp spaces, e.g. bath-

rooms.

• The product is 

not

 a toy! Keep children and animals away from

the product.

• The product is designed for private use and is not intended for

commercial use.

• Only use the product as instructed. Any other use is deemed

improper.

• Defects arising due to improper handling, damage or attempts

at repair are excluded from the warranty. This also applies to

normal wear and tear.

Safety notes

Risks of injury

• The plastic foils and bags pose a suffocation hazard! Keep chil-

dren and animals away from the packaging material.

• Risk of strangulation! Make sure that the connector cables are

always out of the reach of small children and animals.

• Lay the cables so that they do not pose a tripping hazard.

• Do not look directly into the light source! Your eyes could be

injured.

Risk of electric shock and Fire

• Keep the product and the cables away from water or other liq-

uids. If the product does fall in water, immediately disconnect

the power supply. Do not attempt to pull the product out of the

water when it is connected to a device that is connected to the

mains supply!

• Never touch the product or the cables with wet hands.

• Pull the product out of the device or the mains plug of the con-

nected device out of the socket,

when you are not using the product,

if a fault occurs during operation,

before a storm,

before you clean it.

• Do  not  make  any  modifications  to  the  product.  It  is  also  not

allowed  to  replace  the  connector  cables  yourself.  Only  have

the product and the cables repaired by a qualified workshop.

 

Contact customer service if necessary. Improper repairs could

pose serious risks for the user.

Damage to materials, property and the device

• Always mount the product on a dry surface at a sufficient dis-

tance to flammable objects and sources of heat like stovetops, 

ovens,  heaters.  Do  no  place  any  open flames,  e.  g.  burning 

candles, in the direct vicinity of the product and the cables.

• Do not place any containers filled with liquids, e.g. vases, on or 

directly next to the product and cables.

• Do  not  subject  the  product  and  cables  to  extreme  tempera-

tures, severe changes in temperature or direct sunlight.

• Do not place any heavy objects on the product and cables.

• Only  connect  the  product  to  a  device  that  complies  with  the

product’s technical specifications.

•  Make sure that the connector cables do not get pinched, kinked 

or laid over sharp edges and do not come into contact with hot

surfaces.

• If the product and cables exhibit visible damages, the product

may not be used. Do not use the product if it had a malfunction

or liquid has penetrated the product.

• Do not expose the product to severe shocks.

• Do not use corrosive or abrasive cleaning products to clean the

product. They could damage the surface. When needed, wipe

the product off with a soft, dry cloth.

Product contents and product overview

+5

15

1

15

1

15

1

500mm

+5

15

1

15

1

15

1

+5

15

1

15

1

15

1

+5

15

1

15

1

15

1

+5

15

1

15

1

15

1

+5

15

1

15

1

15

1

+5

+5

15

1

15

1

15

1

500mm

+5

15

1

15

1

15

1

+5

15

1

15

1

15

1

+5

15

1

15

1

15

1

+5

15

1

15

1

15

1

+5

15

1

15

1

15

1

+5

2 x LED strips

50cm

1 x USB cable

50cm

1 x IR Receiver 

1 x remote control including button cell 

Start-up

Clean the surface you intend to stick the light strip to.

Peel off the backing strip off the 3M adhesive tape.

Press and hold the light strip firmly against the surface.
Remove the tab from the battery compartment of the remote 

control.

Connect the USB cable to the USB port of the desired device

(television or similar).

Remote control

On/Off switch

White light (mixed colour)

Flash (flashing function)

Strobe (slow fading out of 

a colour)

Fade (slow fading out with 

colour change)

Smooth  (smooth  colour 

change)

Control  panel  for  colour 

selection  (12  mixed  col-

ours)

RGB  setting  (red,  green, 

blue)

Increase/decrease  the  in-

tensity of colour

Illustration similar

1
2

3

4
5
6

9
8

7

8

M

1.

2.

3.

4.

5.

RGB LED TV BACKLIGHT SYSTEM WITH IR

REMOTE 5V USB POWERED

MODEL: 

 USER MANUAL

Отзывы: