Superabrasive
Owner’s Manual – LAVINA® LB36G-S
5/2018
15
THE CONTROL BOARD
1 Start/Stop Engine switch Turn key fully to
the right (make contact) to start the engine,
fully to the left to stop the engine
2 Start/Stop clutch Start will electronically
activate the grinding plates to spin; stop will
disconnect engine from grinding heads
3 Throttle Push forward to accelerate.
4 Digital RPM/workings hours indicator
When the motor runs it indicates the
revolutions per minute of the
motor, see the conversion table to know the
rpm of the tools. When the motor does not
run, it indicates the worked hours.
The hour meter will blink between 48-52
hours as a reminder for oil change.
5 Fuse 30 Amp fuse for the electrical
system.
6 Water pump switch
Lights orange when the water pump is running.
THE CONTROL BOARD WITH DIGITAL FUEL CONTROL SYSTEM
1 Start/Stop clutch Start will electronically activate the grinding plates
to spin; stop will disconnect engine from grinding heads
2
Complete Monitor Assembly is a high-performance digital fuel
control system.
3 Start/Stop Engine switch Turn key fully to the right (make contact) to
start the engine, fully to the left to stop the engine
4 Throttle Push forward to accelerate.
5 Fuse 30 Amp fuse for the electrical system.
6 Water pump switch
Lights orange when the water pump is
running.
Rpm engine rpm tools
2000
1630
2100
1715
2200
1796
2300
1878
2400
1959
2500
2040
2600
2120
2700
2200
2800
2285
2900
2367
3000
2450
3100
2530
3200
2612
3300
2694
3400
2775
3500
2857
3600
2940
Figure 4.5
