LaView LV-N5216D6E, Руководство пользователя

Страница: 12 / 34

www.laviewsecurity.com 11
[PTZ] to modify the PTZ protocol, the baud rate and address bits. Then right click the
corresponding channel and select [PTZ].The PTZ control interface is shown as the following
interface.
Figure 2. 3 PTZ Control interface
Click to enter the PTZ configuration page.
Figure 2. 4 PTZ Configuration
Refer to 4.2 for more details.
2.3.1
PTZ configuration
The direction of PTZ, steps, zoom, focusing, iris, preset points, cruising between points, patrols,
sweeping the boundary, calling an auxiliary switch, light switch, horizontal rotation are controlled
with the usage of the arrow keys.
The [Step] is mainly used to control directions. The figure can be set from 1 to 8.
Directly click
or to adjust zooming, sharpness and brightness.
PTZ supports eight directions.
2.3.2
Quick location
Quick location: <SIT>is in the middle of the direction arrows. Make sure that the protocol
supports this function. PTZ will turn to the clicked point and move it to the center of the screen.
It also supports zooming. Drag the mouse in the quick location page. The dragged box supports 4
to 16 times zooming. Hold the mouse and drag it up to complete zoom of the box. Drag it down