OWNER’S MANUAL
16 gallon Wet/Dry Vacs
For Model:
457PRO16GAL
CONGRATULATIONS!
Electrical Rating: 120 V~ 60 Hz 11 A
CONTENT
IMPORTANT SAFETY INSTRUCTIONS
When using an electric vacuum cleaner, basic precautions should be followed
including the following:
This vacuum cleaner is for domestic use only; it may be used for
vacuuming wet or dry materials and as a blower.
Read all instructions before
using this vacuum cleaner.
To reduce the risk of fire, electric shock or injury:
Do not use to pick up flammable or combustible liquids, such as gasoline or use in areas where
such items may be present.
Use product only as described in this manual, use only manufacturer’s recommended
attachments.
Do not pick up anything that is burning or smoking; such as cigarettes, matches or hot ashes.
Do not leave vacuum plugged in. Unplug from outlet when not in use and before servicing.
Turn unit off before unplugging
Do not put any object into openings. Do not use with any opening blocked.
Keep free of dust, lint, hair and anything that may reduce air flow.
Do not use without filter in place.
Do not allow vacuum to be used as a toy, or to run unattended at any time. If used near
children, close supervision is necessary.
Do not store outdoors.
Do not use with a damaged cord or plug. If vacuum is not working as it should,or if it has been
dropped, damaged, or submerged into water, return it to an authorized service center.
Do not pull or carry by cord, use cord as a handle, close a door on a cord or pull cord around
sharp edges or corners, do not run vacuum over cord. Keep away from heated surfaces.
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
Do not unplug or vacuum with wet hands. Use extra care when cleaning stairs.
Keep hair, loose clothing, fingers and all parts of body away from openings and moving parts.
Never use vacuum cleaner as a pump.
If the line cord is damaged it must be replaced by the manufacturer or an authorized service
center.
Connect to a properly grounded outlet only. See grounding instructions.
Do not use without filter in place. See filter instructions
Do not pick up soot, cement, plaster or drywall dust. These are very fine particles that may
pass through the filter and affect te performance of the motor or be exhausted back into the
air.
Use special care when emptying heavily loaded tanks.
WARNING!
Do NOT use this vacuum cleaner to vacuum lead paint debris because this may
disperse fine lead particles into the air.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
WARNING
PRODUCT DESCRIPTION
VAC ASSEMBLY
Always unplug the vacuum from the outlet
current, before performing any maintenance.
WARNING
FILTER ASSEMBLY
19-1254-00-2
Slide over cage until the filter stops against the lid.
Fig 1.
Fig 2.
Important safety instructions
Warning
Product description
Polarized connection
Grounding instructions
Vac assembly
Caster / Caster foot assembly
Filter assembly
Operation
Cleaning the tank
Storage
Filter maintenance
Trouble shooting
Warranty
You have just purchased a Lavex™. Vacuum Cleaner. Please read this manual carefully before operating
the machine. Model and serial number may be found on the side of your vac. You should record both model
and serial numbers and keep them in a safe place for future use.
Save these instructions for future reference.
A) Easy grip handle
B) Vacuum port
C) Motor head
D) Cartdrige filter
E) Accessory storage
F) Tank
G) Heavy duty line cord
H) Tank drain port
I) Exhaust port / blower (not visible)
J) 1 Caster wheel
K) 1 Caster wheel with brake
L) 2 Rear oversized wheels
M) Crevice tool
N) Pick up tool
O) Floor tool with squeegee
P) Flexible hose with positive lock
Q) 2 wands
R) Dust bag
T) 2 Hose clamps
Note: Not all accessories are included
with all models. Check panel on box
for more information.
POLARIZED CONNECTION
This appliance is for use on a 120 V~ circuit, and has a polarized
plug as shown in figure A. A temporary adapter may be used to
connect this plug to Non-polarized outlet.Temporary adapter should
be used only until a properly polarized outlet can be installed by a
qualified electrician.
NOTE: In Canada, the use of a temporary adapter is not
permitted by the Canadian Electrical Code.
Polarized plug
FIGURE.A
WARNING
Improper connection of the equipment grounding conductor can result in a risk
of electric shock. Check with a qualified electrician or service person if you
are in doubt as to whether the outlet is properly grounded. Do not modify the
plug provided with the appliance if it does not fit the outlet, have a proper outlet
installed by a qualified electrician.
1. This vacuum includes a paper filter for fine dust pick up.
2. The paper filter should always be removed for wet pick ups.
3. When vacuuming liquids the unit has a float thatwill rise to
the top and shut off suction when thetank is full. This will increase
the motor’s rpm’s.
4. Turn off the vac and dump out liquids to continue using the
unit.
FILTER USE
3-Prong
Grounded Plug
Adapter
2-Prong
Outlet
Green
Grounding Lug
Make sure this
is a metal screw
connected to a
known ground
Figure
B
Figure
A
Properly
Grounded
Outlet
3-Prong
Grounded Plug
GROUNDING INSTRUCTIONS
The appliance must be grounded. If it should malfunction or breakdown, groundind provides
a path of least resistance for electric current to reduce the risk of electric shock. This appliance
is equipped with a cord havind an equipment-groundind conductor and groundind plug. The
plug must be inserted into an appropiate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
A
D
E
I
G
H
P
L
J
C
B
K
M
O
Q
N
R
F
Wheel
Plastic caster
foot
Tank
Screw
1. Line up the motor head with the tank. Pull the side latches out and
lower the head. Snap the latches into place. (Fig.1)
2. To connect the hose push on the vacuum port while inserting. Press
the end of the hose into the suction point. (Fig.2)
3. To release the hose, pull out.
4. Place the desired accessory on the other end of the hose.
5. Plug power cord.
6. To turn unit on use switch on motor head.
7. Familiarize yourself with the control and
features of your vacuum cleaner.
Note: Not all accessories are included with all models.
Check panel on box for more information.
ERGONOMIC HANDLE AND CASTERS ASSEMBLY
This vacuum cleaner has an ergonomic handle,
to place it perform the following instructions:
1. Remove the screws from the bracket handle
indicated in the image. fig.1
2. Keep the handle bracket in place and place the
handle in the allotted space.
3. Once the handle is positioned, secure with the screws
Fig 3.
Fig 4.
To assemble the
rear oversized wheels:
1. Turn tank upside down on the floor
2. Insert plastic caster foot into the bottom of tank.
Push until it is flush, with bottom of the tank.
Position the screws as shown in the Fig. 4.
3. Turn the tank upside down.
To assamble
the casters
on the unit:
1. Turn dust drum upside down on
the floor.
2. Insert plastic caster foot into the
bottom of drum.
3. Push until it is flush, with bottom
of the dust drum and position
the screws as shown in the figure.
4. Turn drum upright
T
