Installation and Setup
BLUEPOD TECHNICAL SERVICE
Tel: 1800 800 255 Email: [email protected]
Copyright Bluepod Coffee Co Pty Ltd
Page 5 of 12
LB3200 Colibri
DATE OF ISSUE: 27/01/2011
Initial Setup after installation
1. Ensure the electricity supply is
OFF
and the water supply is
ON
2. Machines are supplied with a Brita water filter, this
must
be fitted and
flushed
before using the machine. Do not proceed further until this is carried out.
3. Open the main machine door with the long silver key. It should be taped inside the
cup dispenser area behind the plastic door.
You will see a small storage drawer on the lower right side inside. Here you will find
the round security key for the base cabinet door (if fitted) as well as the yellow plas-
tic service key. If the bottom cabinet key is lost, you will need to obtain a second one
from Blue Pod. It is unique and cannot be duplicated at a locksmith
4. The 2 grey lids on the top of the machine can now be opened. They are used to fill
the coffee and milk/chocolate canisters. These lids cannot be opened with the door
closed.
5. The left lid is the coffee pod hopper lid. Fill the hopper with coffee pods, it takes up
to 140. Leave
at least 2cm
clearance from the top.
DO NOT FORCE PODS IN
.
The pods need space to sort within the hopper. Do not drop cardboard pieces from
the pod box into the hopper, they can jam the pod mechanism.
6. The milk and chocolate compartments on the right side of the pod hopper will take
up to a bag of product each. Fill with product.
Do not overfill
as the lid will not
close and the machine will not operate.
7. Rotate the sugar /stirrer mechanism outwards to access the sugar container (1)
Lift the lid and fill using normal sugar. Do not use castor sugar.
