LAVAZZA espresso point, Руководство пользователя

Страница: 11 / 29

9
Hot water dispensing
To dispense hot water, position the steam spout in the cup and press the
“hot water dispensing” button.
To stop the flow, press the STOP button.
For hot water dispensing we suggest a maximum time of 30 seconds.
CAUTION
Do not get in the way of the steam or hot water jet dispensed by the steam
spout. Do not touch the steam spout in any way. Danger of burning.
An insufficient quantity of milk for a prolonged time of vaporization may cause
the boiling of the liquid and the consequent overspilling from the container.
During the hot water or vapour supply it is advisable not to go beyond the
time limit of a minute and thirty seconds.
The milk receptacle must never be more than two-thirds full so that it can
contain the increased volume due to the foam.

GB
Note:
the steam dispenser button can also be used to heat any other type of drink
To make sure that the steam spout is properly cleaned after each use, we advise you to
immediately remove the cup with whipped milk or cappuccino and spray another jet of
steam for 5-10 seconds.
For steam dispensing we suggest a maximum time of 60 seconds.
CAUTION
Pick up the container using the handle or by
gripping it at the top.
