LAVAZZA blue LB 400 CLASSY PLUS, Руководство по обслуживанию, Страница: 23 / 46

Technical support maintenance manual
Rel. 0.00 / February 2020
19
Figure C : disconnect this type of
wiring by separating the male con-
nector from the female by pulling
it outwards.
Figure D : remove the clamps ( 3 )
by pressing the bottom part of the
cap with the pliers and pull them
off.
Warning
Use only new terminals during replacement cycles so as to preserve electrical safety of the appliance.
10.2. REMOVAL OF HYDRAULIC CONNECTIONS
This paragraph describes all the types of disconnection of the hydraulic pipes on the machine.
Figure A : remove the type of
hydraulic pipe shown in the figure
by pulling the pipe outwards to di-
sconnect it from the fitting.
Warning
Do not use screwdrivers or
other tools which could dama-
ge the pipes and fittings.
C
3
D
M
A