LAVA Computer MFG. Inc. STS-RBM Installation Manual
– A03
2 Vulcan St. Toronto, ON Tel: +1 416 674-5942 www.lavalink.com
2 of 8
Canada, M9W 1L2 Fax: +1 416 674-8262 Toll-Free (US & Canada): 800 241-5282
Introduction
Using a LAVA STS-RBM requires the following installation steps:
Obtain a copy of the “LAVA STS-RBM Software Release.RAR” from LAVA Sales or Support
Copy the LTM.INI file, required by your tablet, to the tablet “Download” folder
Install the LAVA Tablet Manager applications on the tablet
Install the LAVA Battery Information application on the tablet
Enable a WiFi connection
Enable the LTM application as a Device Administrator and activate the KNOX license
Disable the WiFi connection (optional)
Turn off the “auto screen brightness” on the Tablet
Verify the time zone and time on the Tablet
Verify the TYPE jumpers on the STS-RBM are set for your tablet model
Connect the STS-RBM Product to the Tablet with the supplied LAVA cable
Apply power to the STS-RBM Product
Do not plug in USB accessories during the initial setup. Always test a system in incremental steps and in
the prescribed order.
This document describes each of the above steps in further detail.
Note:
The LAVA Tablet Manager
must
be installed on the tablet; else the STS-RBM Product
restarts the tablet power and USB connection every few minutes.
Note:
The TYPE jumpers on the STS-RBM must be set for your tablet model.
