LAUSON
SPEAKER
3
EN
CONNECT TO BLUETOOTH DEVICE
Bluetooth and TWS function
Turn on the both of units. Start to searching and select “
BT SPEAKER-L
” in the list of Bluetooth
devices, when the connection is successful, the indicate tone will be on how to use true wireless
stereo function if people has 2pcs and both of them has TWS function. Then turn on both units,
and press any pcs of the play/pause button few second. Then 2pcs unit will connect
automatically
Note: true wireless stereo function only work in Bluetooth mode.
BLUETOOTH
Turn on the speaker, it comes into the Bluetooth mode directly. After pair the device, it can play
the music, short time press
4
ll to play/pause, press -/
and
/+ to prev and next. Long
time press -/
and
/+ to turn down and turn up the volume.
AUX-IN
Aux-in, press the mode button to change to aux mode, plug the audio cable into aux jack, press
and hold the -/
and
/+ buttons to decrease and increase the volume.
USB/TF CARD
Insert the USB or TF card into the USB/TF Slot, it will read the mp3 format music automatically.
press
4
ll to play/pause, short time press -/
and
/+ to prev. and next, press and hold the
-/
and
/+ buttons to decrease and increase the volume.
FM RADIO
Press the mode button to change to FM radio mode, and then press the
4
ll
Button to search FM channel automatically. This operation will scan all FM stations and pre-
record them to the memory. The scan procedure will take several minutes to complete and
should not be interrupted. Once complete, you can short press -/
or
/+ to move forward
or backward. Press and hold the -/
and
/+ buttons to decrease and increase the volume
CHARGING
Plug the USB cable into speaker micro USB port and connect to power source. Red led on when
charging.
