LAUSON
IRON
ASI114
3
EN
The iron must be used and rested on a stable surface.
When placing the iron on its stand, ensure that the surface on which the stand is
placed is stable.
The iron is not to be used if it has been dropped, if there are visible signs of damage
or if it is leaking.
BEFORE FIRST USE
It is normal for small amount of smoke to be produced the first time,this will quickly
disappear.
When using the steam function for the first time, do not direct the steam towards the
laundry, as there could be debris from the steam vents.
FILLING WITH WATER
We recommend the use of distilled water.
Make sure that both the Steam Control turning Knob and Temperature Control Dial
are in “OFF” position.
Hold the iron upright so that the water-filling inlet is in a horizontal position.
Fill with water through Water Filling Inlet until the water reach the “MAX” mark
indicated on the side of the iron, and never fill above this mark.
SETTING TEMPERATURE
Follow the ironing instructions on the garment label. If there is no instruction but you do
know the kind of fabric, please consult the following table.
Note: If the fabric consists of various kinds of fabrics, always select the temperature
required by the most delicate fabrics.
Fabric
Temperature control
Temperautre requirement
Silk
●
Low temperature
wool
●●
Medium temperature
Cotton, linen
●●●
High temperature
STEAM
IRONING
Place the iron in a vertical position and set the temperature control dial at the
minimum/low heat setting.
Insert the plug into the socket, and then turn the temperature control dial to the “high
heat” marking. The pilot light will come on, indicating that the iron is heating up.
When the pilot light turns off, the set temperature has been reached and the iron is
ready to use.
During ironing, the pilot light on the iron automatically switches on/off as the
thermostat maintains the set temperature(you may continue ironing during this
