background image

i

                                                                             FX9000 User Manual

Copyright Information

Copyright © 2020 by OBDSPACE TECHNOLOGY CO., LTD. All rights reserved. 

No part of this publication may be reproduced, stored in a retrieval system, or 

transmitted in any form or by any means, electronic, mechanical, photocopying 

and recording or otherwise, without the prior written permission of ANCEL. The 

information contained herein is designed only for the use of this unit. ANCEL is 

not responsible for any use of this information as applied to other units.
Statement: ANCEL owns the complete intellectual property rights for the software 

used by this product. For any reverse engineering or cracking actions against 

the software, ANCEL will block the use of this product and reserve the right to 

pursue their legal liabilities.

Trademark Information

ANCEL is a registered trademark of OBDSPACE TECHNOLOGY CO., LTD. 

(also called ANCEL for short) in China and other countries. All other ANCEL 

trademarks, service marks, domain names, logos, and company names referred 

to in this manual are either trademarks, registered trademarks, service marks, 

domain names, logos, company names of or are otherwise the property of 

ANCEL or its affiliates. In countries where any of the ANCEL trademarks, service 

marks, domain names, logos and company names are not registered, ANCEL 

claims other rights associated with unregistered trademarks, service marks, 

domain names, logos, and company names. Other products or company names 

referred to in this manual may be trademarks of their respective owners. You 

may not use any trademark, service mark, domain name, logo, or company 

name of ANCEL or any third party without permission from the owner of the 

applicable trademark, service mark, domain name, logo, or company name. 

You may contact ANCEL by visiting the website at www.anceltech.com, or 

writing to OBDSPACE TECHNOLOGY CO., LTD., Runfeng office, Longhua 

district, Shenzhen, Guangdong, P.R.China, to request written permission to use 

Materials on this manual for purposes or for all other questions relating to this 

manual.

General Notice

•  Other product names used herein are for identification purposes only and 

may be trademarks of their respective owners. ANCEL disclaims any and all 

rights in those marks. 

•  There is a possibility that this unit is inapplicable to some of the vehicle 

models or systems listed in the diagnosis section due to different countries, 

areas, and/or years. Do not hesitate to contact ANCEL if you come across 

such questions. We are to help you solve the problem as soon as possible.

Содержание FX9000




























































Отзывы: