![background image](http://html1.mh-extra.com/html/launch/creader-v/creader-v_user-manual_3892035006.webp)
LAUNCH CreaderV User’s Manual
reserved to make change at any time without notice.
Safety Precautions and Warnings
To prevent personal injury or damage to vehicles and/or the
CreaderV, please read this instruction manual first carefully and
observe the following safety precautions at a minimum whenever
working on a vehicle:
z
Always perform automotive testing in a safe environment.
z
Do not attempt to operate or observe the tool while driving a
vehicle. Operating or observing the tool will cause driver
distraction and could cause a fatal accident.
z
Wear safety eye protection that meets ANSI standards.
z
Keep clothing, hair, hands, tools, test equipment, etc. away from
all moving or hot engine parts.
z
Operate the vehicle in a well-ventilated work area: Exhaust gases
are poisonous.
z
Put blocks in front of the drive wheels and never leave the vehicle
unattended while running tests.
z
Use extreme caution when working around the ignition coil,
distributor cap, ignition wires and spark plugs. These components
create hazardous voltages when the engine is running.
z
Put the transmission in P (for A/T) or N (for M/T) and make sure
the parking brake is engaged.
z
Keep a fire extinguisher suitable for gasoline/chemical/ electrical
fires nearby.
z
Don’t connect or disconnect any test equipment while the ignition
is on or the engine is running.
z
Keep the CreaderV dry, clean, free from oil/water or grease. Use a
mild detergent on a clean cloth to clean the outside of the
CreaderV, when necessary.
vi
Содержание CReader V
Страница 1: ...CReader V User s Manual PDF version provided by ScanTool net LLC www scantool net...
Страница 37: ...LAUNCH CreaderV User s Manual 31...
Страница 41: ...LAUNCH CreaderV User s Manual Click OK Select slabw2k inf click OK 35...
Страница 42: ...LAUNCH CreaderV User s Manual Click Next Click Finish CreaderV driver installation is finished 36...