background image

i

LAUNCH

                                                               

Professional 909 User Manual

Copyright Information

Copyright © 2019 by LAUNCH TECH CO., LTD. All rights reserved. No part of 

this publication may be reproduced, stored in a retrieval system, or transmitted in 

any form or by any means, electronic, mechanical, photocopying and recording 

or otherwise, without the prior written permission of LAUNCH. The information 

contained herein is designed only for the use of this unit. LAUNCH is not 

responsible for any use of this information as applied to other units.

Statement: LAUNCH owns the complete intellectual property rights for the software 

used by this product. For any reverse engineering or cracking actions against the 

software, LAUNCH will block the use of this product and reserve the right to pursue 

their legal liabilities.

Trademark Information

LAUNCH is a registered trademark of LAUNCH TECH CO., LTD. (also called 

LAUNCH for short) in China and other countries. All other LAUNCH trademarks, 

service marks, domain names, logos, and company names referred to in this 

manual are either trademarks, registered trademarks, service marks, domain 

names, logos, company names of or are otherwise the property of LAUNCH or 

its affiliates. In countries where any of the LAUNCH trademarks, service marks, 

domain names, logos and company names are not registered, LAUNCH claims 

other rights associated with unregistered trademarks, service marks, domain 

names, logos, and company names. Other products or company names referred 

to in this manual may be trademarks of their respective owners. You may not use 

any trademark, service mark, domain name, logo, or company name of LAUNCH 

or any third party without permission from the owner of the applicable trademark, 

service mark, domain name, logo, or company name. You may contact LAUNCH 

by visiting the website at www.cnlaunch.com, or writing to LAUNCH TECH CO., 

LTD., Launch Industrial Park, North of Wuhe Avenue, Banxuegang, Bantian, 

Longgang, Shenzhen, Guangdong, P.R.China, to request written permission to 

use Materials on this manual for purposes or for all other questions relating to 

this manual.

Содержание Creader Professional 909



























































Отзывы: