LAUNCH
X-431 Diagun III English User’s Manual
Fig. 3-23
After selecting, click [OK], the recorded
dynamic data will appear again, as
shown on the left.
Button Descriptions:
z
[Left]: show the hidden datastream
on the left.
z
[Right]: show the hidden datastream
on the right.
Fig. 3-23
3.3.7 Capture Screen
This function enables you to make data
comparison and analysis based on the
captured snapshots. Follow the steps
described as below to proceed
1.
To capture the current screen, press
[POWER] button for 3 seconds, and
then click “Snapshot” from the list to
save the captured image into the TF
card.
2.
Press the TF card gently and the TF
card will automatically eject, then
take it out from the TF card slot.
3.
Insert the TF card into the card
reader (as shown in Fig. 3, the side
printed with words faces upward,
and insert the TF card into the card
reader perpendicularly.
4.
Connect the TF card to the USB port
29
www.obd2express.co.uk
