LAUMAS W200-C Скачать руководство пользователя страница 9

Страница: 9 / 56

- 4 -

MAIN SPECIFICATIONS OF THE INSTRUMENT

Indicator with 6-wire load cell input in DIN box (96x96x130 mm; drilling template 91x91 mm) for panel
front mounting. Front panel protection rating IP54 (IP65 front optional). 6-digit semi−alphanumeric

display, 14 mm, 7 segments; 8 indicator LEDs. 5−key membrane keypad with buzzer. Real-time

clock/calendar with buffer battery.

W200BOX - IP67 waterproof ABS box version: dimensions 170x140x95 mm; four fixing holes

Ø 4 mm (centre distance 152x122 mm).

W200BOX-EC - IP64 waterproof ABS box version: dimensions 170x140x95 mm, four fixing holes

Ø 4 mm (centre distance 152x122 mm). Equipped with external selector switch for formula selection

(EC option), Start and Stop buttons.

W200 IP67 - IP67 waterproof polycarbonate box version: dimensions 180x130x77 mm, four fixing

holes Ø 4 mm (centre distance 163x113 mm).

W200 IP64 - IP64 waterproof polycarbonate box version: dimensions 180x130x77 mm, four fixing

holes Ø 4 mm (centre distance 163x113 mm). Equipped with external selector switch for formula

selection (EC option), Start and Stop buttons, four PG9 cable glands.

Two serial ports (RS485 and RS232) for connection to: PC/PLC up to 32 instruments (max 99 with

line repeaters) by ASCII Laumas or ModBus R.T.U. protocol, remote display, printer. Optional:

integrated Profibus DP, DeviceNet, CANopen, Profinet IO, Ethernet/IP, Ethernet TCP/IP,
Modbus/TCP output.

The instrument can be connected to a CLM serie intelligent junction box or to a multi-channel weight

transmitter.

BUFFER BATTERY

The instrument is equipped with an internal battery that allows to keep active the internal clock even

in the event of power failure.

At the first start and after long periods of inactivity, leave the instrument on for at least 12

hours to fully charge the battery.

Содержание W200-C

























































Результаты поиска

Содержание W200-C

Отзывы:

Похожие инструкции для W200-C

Бренды по названию

Популярные бренды

LAUMAS W200-C, Инструкция по установке и эксплуатации

Результаты поиска

Содержание W200-C

Отзывы:

Похожие инструкции для W200-C

Бренды по названию

Популярные бренды