LAUMAS LCB, Руководство по установке

Страница: 4 / 24

- 1 -
USER WARNINGS
RECOMMENDATIONS FOR THE PROPER USE OF WEIGHING INSTRUMENT
-
Keep away from heat sources and direct sunlight
-
Do not dip in water
-
Do not spill liquid on the instrument (refer to the materials table)
-
Do not use solvents to clean the instrument (refer to the materials table)
-
Do not install in areas subject to explosion hazard
The following table shows the material of the instrument components exposed to external agents:
COMPONENT MATERIAL DETAILS
Cover Stainless steel AISI316
Base Stainless steel AISI316
Screws Stainless steel AISI316
Rectangular seal Elastomer EPDM
M12 connectors
Metal Nickel-plated zinc alloy
Elastomer Silicone
M12 connector counterparts
Metal Nickel-plated zinc alloy
Elastomer EPDM
Plastic Nylon
Flying connector cap Plastic PA6.6
Light guides Plastic PC
Clamping nut Stainless steel AISI316
PG9 cap Stainless steel AISI316
PG9 O-Ring Elastomer NBR
PG7 cable gland Plastic PA6.6
PG7 O-Ring Elastomer NBR
Label Plastic Polyester