LAUMAS LCB, Руководство по установке

Страница: 16 / 24

- 13 -
CURRENT OUTPUT AND VOLTAGE OUTPUT CONNECTION
All analog outputs of the instrument are ACTIVE and SINGLE ENDED type, therefore they can be
connected only to PASSIVE receiver devices. The minimum load allowed for voltage outputs is
2 kohm, the maximum load allowed for current outputs is 400 ohm.
CANOPEN
Instrument model LCBCANOPEN
Baud rate (kb/s) 10, 20, 50, 125, 250, 500, 800, 1000
Node ID 1÷127
BUS IN – male M12 connector, 5 pin, A-coded
1
2 CAN SHLD
3 CAN H
4 CAN GND
5 CAN L
BUS OUT – female M12 connector, 5 pin, A-coded
1 CAN SHLD
2
3 CAN GND
4 CAN H
5 CAN L
ACTIVE
ANALOG
OUTPUT
PASSIVE
RECEIVER
Voltage or current analog signal
-
COMMON