LAUMAS LCB, Руководство пользователя

Страница: 23 / 80

- 18 -
ZERO TRACKING

(from 1 to 5, default:

): When the weight value is stable and, after a second, it
deviates from zero by a figure in divisions smaller or equal to the figure in divisions set in this
parameter, the weight is set to zero. To disable this function, set
 .
Example: if the parameter

is set to 5 and

is set to 2, the weight will be
automatically set to zero for variations smaller than or equal to 10 (  x  ).
COMMUNICATION INTERFACE
WRITING READING

Write the value* in W1.

Send command 6104 to CMDR.

Send command 6103 to CMDR.

Read the value* in R1.
*0= function disabled
SETTING UNITS OF MEASURE
These are the available units of measure:
UNITS OF MEASURE
Unit of measure
index
Visualisation Description Display coefficient effect
on the weight
0

Kilograms No effect
1

Grams No effect
2

Tons No effect
3

Pounds Multiplies
4

Newton Multiplies
5

Litres Divides
6

Bar Multiplies
7

Atmospheres Multiplies
8

Pieces Divides
9

Newton metres Multiplies
10

Kilogram metres Multiplies
11

Other Multiplies
COMMUNICATION INTERFACE
WRITING READING

Write the unit of measure index* in W1.

Send command 6030 to CMDR.

Send command 6029 to CMDR.

Read the unit of measure index* in R1.
*see UNITS OF MEASURE table
    
   