LAUMAS LCB, Руководство по установке

Страница: 9 / 24

- 6 -
MAIN SPECIFICATIONS OF THE INSTRUMENT
Weight transmitter with 4-wire load cell input, AISI316 stainless steel box. 6 status LEDs.
Micro USB-B connector for PC connection.
The instrument is available in different versions, depending on the communication interface:
RS485 serial port (for connection to: PC/PLC up to 32 instruments, max 99 with line repeaters, by
ASCII Laumas or ModBus R.T.U. protocol, remote display, printer), 16 bit analog output (tension or
current), Profibus DP, CANopen, Profinet IO, Ethernet/IP, Modbus TCP, SERCOS III, PowerLink,
EtherCAT, CC-Link, IO-Link.
The instrument is managed and configured via PC through the LCB Manager software,
or remotely via serial protocol or fieldbus; for specific information, refer to the LCB
Manager and Communication protocols manuals respectively.
PARTS IDENTIFICATION
1. BUS IN/BUS OUT: M12 connectors
specific for the communication
interface; the corresponding flying
connectors with solder terminals
are supplied.
2. SERVICE: M12 connector
dedicated to the instrument power
supply and to the digital outputs
and inputs connection; the
corresponding flying connector with
solder terminals is supplied.
3. L1÷L6: Status LEDs of the
communication interface.
4. PG9 cap with hexagonal head.
5. Hole for USB input.
6. Hole for load cell input.
7. M4 holes suitable for any fixings.