Lauda UC 2 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 55

background image

5

1

INTRODUCTION

1.1

GENERAL NOTES

•

This water chiller complies fully with CE.

•

The Company does not accept responsibility if safety regulations are not met during handling, operation,
maintenance and repair, even though these may not be strictly stated in this operation manual.

•

We recommend the translation of this operation manual into the native language of foreign workers.

•

The usability and life cycle of the water chiller as well as avoiding premature repairs depends on proper
operation, maintenance, care and competent repair under consideration of this operation manual.

•

We are constantly updating our products and are confident that they respond to the latest scientific and
technological demands. However, as manufacturers, we do not always know the end use or the total range
of our pr

oducts’ applications. Therefore we cannot accept liability for our products in applications where

additional safety measures may be necessary. We highly recommend that users inform us of the intended
application in order to undertake additional safety measures, if necessary.

1.2

SAFETY REGULATIONS

The operator has to observe the national working, operating and safety regulations. Also, existing internal

factory regulations must be met.

Maintenance and repair work must only be carried out by specially trained personnel and, if necessary, under

supervision of a person qualified for this work.

•

Protective or safety devices must not be removed, modified or readjusted.

•

During operation of the water chiller none of the protective or safety devices must be removed, modified
or readjusted, temporarily or permanently.

•

Only use correct tools for maintenance and repair work.

•

Use original spare parts only.

•

All maintenance and repair work must only be carried out to the machine once it has been stopped and
disconnected from the power supply. Ensure that the water chiller cannot be switched on by mistake by
unplugging it.

•

Do not use flammable solvents for cleaning.

•

Keep the surrounding area absolutely clean during maintenance and repair work. Keep free of dirt by
covering the parts and free openings with clean cloth, paper or adhesive tape.

•

Ensure that no tools, loose parts or similar are left inside the system.

•

The refrigerant circuit controls are set before shipment of the unit. They should not be re-adjusted under
any circumstances (except by an authorized service agent). This would void the warranty of the unit.

«
...
3
4
5
6
7
...
»

Содержание UC 2
























































Отзывы:

Нет отзывов

Похожие инструкции для UC 2

Бренд: CyberChill Страницы: 12

Бренд: AERMEC Страницы: 15

Бренд: ADEO Services Страницы: 61

Millennium YCAS 316

Бренд: York Страницы: 144

Бренд: Land Pride Страницы: 2

645A Super Bronco

Бренд: Troy-Bilt Страницы: 36

Бренд: Farmi Страницы: 72

Бренд: MTD Страницы: 16

Бренд: Kaysun Страницы: 160

Therminator 057.029.1

Бренд: Blichmann Engineering Страницы: 7

Бренд: Yard Machines Страницы: 64

Бренд: Quantech Страницы: 62

Бренд: Koeppl Страницы: 36

Бренд: York Страницы: 100

Clima-Flex IOM CLIM Series

Бренд: Daikin Страницы: 68

Бренд: Skope Страницы: 60

Бренд: Troy-Bilt Страницы: 20

CRAFTSMAN 944.621574

Бренд: Sears Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды