Lauda UC 2 Скачать руководство пользователя страница 22

Страница: 22 / 55

CHILLER CONTROLS

5.1

CONTROL AND MONITORING ELEMENTS

Controller (UC 2 and UC 4)

Main Power Switch

Webserver controller display

Status LED (UC 8 to UC 100)

Warning/Alarm LED (UC 8 to UC 100)

External controller display (UC 8 to UC 100)

The following elements allow controlling the chiller and monitoring its status:

Status LED (UC 8 to UC 100): It blinks when the unit is turned Off and is waiting for an On signal. It is

lit steadily when the unit is turned On.

Warning/Alarm LED (UC 8 to UC 100): It blinks when a Warning is active, the chiller is still running. It

is lit steadily when an Alarm is active; either the refrigerant circuit or the complete unit is stopped. See

point 7 for troubleshooting.

Main power switch: Located on the right side of the chiller. It connects and disconnects the Ultracool

unit from the power supply.

Controller display: It shows all information on the operation of the chiller and allows controlling it. It can

be accessed either from the external display connected to the chiller or from any computer connected

to the same Ethernet network as the chiller by accessing its webserver from a web browser.

To access the webserver, the chiller must be connected to the network with an Ethernet cable, see point

3.6 or 3.7.

Содержание UC 2
























































Результаты поиска

Содержание UC 2

Отзывы:

Похожие инструкции для UC 2

Бренды по названию

Популярные бренды

Lauda UC 2, Руководство по эксплуатации

Результаты поиска

Содержание UC 2

Отзывы:

Похожие инструкции для UC 2

Бренды по названию

Популярные бренды