background image

 

31 

5.6

 

LAUDA.LIVE CLOUD SERVICE 

 

The Ultracool unit enables the communication of device data to the cloud-based LAUDA.LIVE service. The 

service provides various optional features and offers, such as remote maintenance. 

 

Please contact LAUDA or visit our website for detailed information about LAUDA.LIVE and its services. 

 

To implement the LAUDA.LIVE service, device data is exchanged with the LAUDA.LIVE cloud via an 

encrypted connection, enabling the LAUDA service to remotely maintain the unit. 

 

Requirements: 

-

 

The Ultracool unit needs a custom gateway device to have a direct connection to the Cloud services 

(contact LAUDA to request more information). 

-

 

The Ultracool unit will need to connect through Ethernet directly to the gateway.  

-

 

The gateway will need access to a power socket and have the antenna placed in a location with good signal 

reception. 

 

By default the Ultracool units block the communications with the CLOUD and must be given permission 

through the display menu explicitly. In this menu the permissions are divided between write/read and 

operation/service parameters.  

 

Within this distinction, operating parameters are those directly shown to the user via the device display and 

could be changed by the user. The service parameters are only available to the LAUDA Service team. 

 

LAUDA.LIVE permissions screen: 

The Settings screen loop contains a screen to enable or disable the communications with the LAUDA.LIVE 

service and to set its access permissions. 

 

This function only works if the service has been requested and activated for this particular unit and if the unit 

itself is connected to a gateway through an Ethernet connection. The chiller does not have internet 

connectivity on its own. 

 

 

 

 

 

 

 

 

 

 

Содержание UC 2
























































Отзывы: