Lauda RP 3090 C, Руководство по эксплуатации

Страница: 35 / 136

03/2022 Proline Kryomats 35 / 137
Metal hoses in non-rusting stainless steel, with union nut M16 x 1, internal width 10 mm.
Type Length (cm) Temperature range °C Field of application Order number
MK 50 50 -90 – 150
With foam insulation for
refrigeration range,
for all heat transfer liquids
LZM 052
MK 100 100 -90 – 150 LZM 053
MK 150 150 -90 – 150 LZM 054
6.5 Connecting external loads
Notice Leaks from consumers, hoses and accessories
Environmental hazard from leaking heat transfer liquid

Always secure the hoses with suitable safety devices.
Notice
Pump connections not closed off
Environmental hazard from leaking heat transfer liquid

Fit sealing plugs to the pump connections when no external
consumers are connected and set the flow distribution to
internal “INT”.
Operation as circulating thermostat
Caution!
Bursting of the external consumer due to overpressure
Scalding, frostbite, cutting

Use a pressure relief device on pressure-sensitive consumers
(e.g. glass reactors).

When used as circulation thermostat, care for shortest
hose connections with largest inner diameter as possible.
This gives the best flow.
 Push hose with 11-12 mm internal width onto hose
olive (accessories) or connect metal hoses (

6.3) to
pump connectors.

Pump connectors at side:
Inlet and outflow

see labeling housing.

Pump connectors at back:
Inlet and outflow

see labeling housing.

Set bypass valve to "external" (

3).