Lauda P 10, Руководство по эксплуатации

Страница: 74 / 160

This section is relevant for:

Device operation using the Command Touch unit
1. Open the Home window.
2. Touch the [Tih / Til] tile.
3. Touch one of the following buttons:

Select the first entry Til to set the lower limit value.

Select the second entry Tih to set the upper limit value.
4. Press [OK] to confirm.
Refer to
Ä
“Input window for entering values manually” on page 67 for more
information on working with the input windows.
5.10 Setting the temperature target value T
set
The temperature target value T
set
is the temperature that the constant
temperature equipment should reach and then maintain.
This section is relevant for:

Device operation using the Command Touch unit
1. Open the Home window.
2. Touch the [Tset] button.

The entry window appears. A temperature target value can be
entered within the limit values displayed.
3. Enter the new temperature target value.
4. Press [OK] to confirm the new value.

The value is accepted.
Refer to
Ä
Chapter 5.6.2 “Entry window” on page 67 for more
information on working with the input windows.
Setting Tih and Til
Fig. 38: Selecting the Temperature limit tile
Fig. 39: Entering target value
V6 PRO bath thermostats and circulation thermostats 74 / 156