Lauda Mobifreeze M270, Руководство по эксплуатации, Страница: 26 / 94

4.5 Operating elements
4.5.1 Mains switch
The mains switch can be set to the following positions:
n
Position [I] switches on the device under mains power. Mains voltage is
supplied to the device and the main battery is charged provided that the
mains cable is connected to the mains power supply.
n
Position [O] switches off the device from the mains power. If the main
battery switch is set to the [I] position, the device receives power from
the main battery and can continue to operate. In this position, the main
battery switch lights up green.
If the mains switch is set to the [O] position, the device does not
receive power from the mains power supply and the main battery is
not charged.
However, the device can still operate if the battery switch is set to
the [I] position and it receives power from the main battery.
4.5.2 Main battery switch
The main battery switch is not pressed:
n
In the [O] position, the main battery is switched off and the device does
not receive power from the main battery. If the device is not supplied
from the mains power, it is not operational.
n
In this state, the main battery switch does not light up.
The main battery switch is pressed:
n
In the [I] position, the main battery is connected. The device receives
power from the main battery if no power is received from the mains
supply.
n
In this state, the main battery switch lights up.
4.5.3 Push/pull handle
1 Push handle on the operating console/front of the
device
2 Pull handle on the back of the device
Fig. 10: Mains switch
Fig. 11: Main battery switch not pressed
Fig. 12: Main battery switch pressed
Fig. 13: Handles
V1 Mobifreeze 26 / 93