Lauda L 100, Руководство по эксплуатации

Страница: 15 / 48

3.3 Operating buttons
The three operating buttons can be used to control the functions of
the device.
 Use the [Set] button to configure the set temperature.
 Use the [Menu] button to pull up the menu, in order to con-
figure settings.
 Use the[Stop] or [Start] button to switch the device to standby
or operation mode.
The device supports two operating modes.
 In Standby operation mode, the device's pump and tem-
perature control unit are turned off. Power is supplied to the
display on the device. This operating mode is suitable for
adjusting settings, for example.
 In Operation mode, the components of the device are acti-
vated.

Use the [Display] button to switch back and forth between the
home screen and the display window for warnings (only pos-
sible if a warning has been generated by the device).
 Use the [Down] and [Up] arrow buttons

to navigate through the menu and/or
 change set values.

Use the [OK] input button to confirm the selection in the dis-
play.

Use the[ESC] menu item to navigate one window back in the
menu.

If no entry is made in the home screen for 10 seconds, the
operating button configuration will fade out and the tem-
perature display will be magnified in the display. If you press on
any one of the operating buttons, they will darken again.
 If no entry is made in the menu for 30 seconds, then the dis-
play will return to the home screen.
3.4 RS 232 interface
You can use the RS 232 interface to control certain device func-
tions, such as set temperature, on a PC. You can develop and use
your own programs for controlling the device.
Fig. 7: Operating buttons in the home
screen
Setup and operating buttons
LOOP 15