Lauda Integral XT 150, Руководство по эксплуатации

Страница: 57 / 168

Integral XT
YAWE0028 / 24/06/2016
Starting up
55
7.7 Draining
Start draining
−
On the floor-standing device the drain taps and
drain points are located on the right side of the
housing, on the bench-top model they are on the
front panel at the bottom right.
−
Use the draining program so that the valve set-
tings for draining in the hydraulic circuit are opti-
mum.
Menu
à
Pump
à
Start draining .
−
Drain the heat transfer liquid via all the drain taps
(1 to 4 depending on the device). To do this push
on a hose.
+
−
Follow the regulations for disposing of the used heat transfer liquid.
−
Use all available drain taps to achieve optimum draining.
Do not drain the heat transfer liquid in the hot state over 90 °C or below 0 °C.
Drain tap and drain-
ing points