manualshive.com logo in svg

Lauda IN 550 XT, Руководство по эксплуатации

Поделиться
Скачать
Lauda IN 550 XT Скачать руководство пользователя страница 115

Locking of the Operator privileges in the Master

n

If a Safe Mode is triggered, the Operator privileges are transferred to

the Master and locked/owned exclusively there. If the Safe Mode is

deactivated, the exclusive ownership is withdrawn from the Master.

6.19 

Lock and release operating buttons

The operating buttons can be locked in order to protect the device when

using a process control system or against unauthorized access.

Personnel:

n

Operating personnel

1.

Switch to the main menu.

2.

Press and hold down the [input button].

3.

Press and hold down the [Down] arrow button within 4 seconds.

4.

Hold down both buttons for 4 seconds.

In the display the descriptions of the buttons are replaced by

[---].
The entry function is now locked.

Personnel:

n

Operating personnel

1.

Press and hold down the input button.

2.

Press and hold down the [Down] arrow button within 4 seconds.

3.

Hold down both buttons for 4 seconds.

In the display the descriptions of the buttons show up again.
The device can be operated again.

6.20 

Web server LAUDA Command

The LAUDA device is equipped with an integrated Web server. The Web

server is used to visualize device-internal and process-relevant data such as

temperature, pressure and flow rate. The scope of the information displayed

depends on the device, device type and installed accessories.
You can use the following software to access the Web server:

n

LAUDA Command app:

Available in the app atores for mobile devices based on iOS and Android

and in the Windows Store for Windows-based PC systems.

The LAUDA Command app can also be downloaded from the LAUDA

homepage for Windows-based PC systems. Open the LAUDA home-

page, tap 

 Services

 

 Download center

. In the Download center, chose

the [Software] option in the [Document type] drop-down list.

n

Web browser:

Connection to the LAUDA device via a browser.

Lock the operating button

Release operating buttons

The embedded Web server

V4

Integral process thermostats with flow control unit

115 / 171

Содержание IN 550 XT













































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды