Lauda IN 1030 T, Руководство по эксплуатации

Страница: 142 / 200

9.3 Cleaning the device
WARNING!
Risk of cleaning agent entering the device
Electric shock

Only use a slightly damp cloth to clean the device.
Please also note the following:
n
Only use water and detergent to clean the operating unit. Do not use
acetone or solvent as these substances will permanently damage the
plastic surfaces.
n
Ensure that the device is decontaminated after coming into contact with
hazardous materials.
n
It is forbidden to use decontaminants or cleaning agents that may react
with parts of the device or materials contained in those parts and poten-
tially pose a hazard.
n
We recommend using ethanol as a decontaminant. If you are unsure
whether decontaminants or cleaning agents are compatible with parts of
the device or the materials contained in those parts, please contact the
LAUDA Service department.
9.4 Cleaning the air-cooled condenser
This section is relevant for:
n
Air-cooled devices
WARNING!
Risk of mechanical damage to refrigerant circuit
Explosion, fire

Do not use pointed objects to clean the condenser.
Protective equipment:
n
Safety glasses
n
Protective gloves
n
Protective work clothing
With increasing operating time, the condenser becomes clogged with dust
from the environment. This leads to a performance loss of cooling output.
1.
Switch off the device.
2. Pull out the mains plug.
V6 Integral Process Thermostats and High-Temperature Thermostats 142 / 198