Lattice Himax HM01B0 UPduino Shield, Быстрый запуск

Страница: 1 / 2

Quick
START
Himax HM01B0 UPduino Shield
This document provides a brief introduction to Himax HM01B0 UPduino Shield.
1
2
3
Check Kit Contents
The Himax HM01B0 UPduino Shield contains
the following items:
„
UPduino 2.0 Board
„ Himax HM01B0 Adapter Board
„
Micro-USB Cable
„ Quick Start Guide
Using the Himax HM01B0 UPduino Shield
Note: The SPI Flash Configuration Memory on the Himax HM01B0 UPduino Shield is
preloaded with the Human Presence Detection demonstration described below. You
can download additional demonstrations and learn how to reprogram the board at
www.latticesemi.com/himax.
Installing the Software
The Himax HM01B0 UPduino Shield is pre-programmed with the Human Presence
demonstration.
To develop your own solutions, download and use the Lattice Radiant Design Software
(Version 1.0 or later), downloadable from www.latticesemi.com/radiant .
If you only need to re-program the board, you can use the Radiant Programmer
standalone software (Version 1.0 or later).