Certus-NX Versa Evaluation Board Demo
User Guide
© 2021 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at
All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
FPGA-UG-02133-1.1
19
5.
To run the demo software, click on the 7 Seg Display tab to view the contents of the 7 segment control page.
In this page, you can run a demonstration LED sequence and control the display on your board from the console.
The 7 Seg Display page provides a way to interactively toggle segments on the display. You can present character
sequences from this page or select single characters and run them to light the display.
Figure 4.2. User Interface Control of 7-Segment Display
6.
Click on any segment in the interactive segment display in the 7 Seg Display page. Notice that any selection
immediately causes the corresponding segment on the LED to light on your board’s LED display. Clicking on a
segment turns it on or off.
7.
Click the Reset button to turn off all the LED displays.
8.
Enter a number between 0 and F and click the Set button. This toggles on the respective segments both on the
board and on the user interface.
Figure 4.3. Onboard 7-Segment Display
