Certus-NX Versa Evaluation Board Demo
User Guide
© 2021 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at
All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
10
FPGA-UG-02133-1.1
3.
Provide the location where you want to install the application. Click Next.
Figure 3.2. Select Destination Folder
4.
Click the Install button.
Note: You need administrator access to run this command.
Figure 3.3. Confirm Install
5.
The installation of the Certus-NX Basic Demo Application starts. When installation is completed, the drivers are
installed.
